Emergency
MR-AX Multi-Gas Detector Can Measure Dozens Of Gases
main feature
- Adopt high-precision gas sensor, with faster response time and stronger anti-interference performance
- Self-created core algorithm, temperature, zero point compensation, independent intellectual property rights;
- Built-in imported constant current sampling pump, the detection is more stable and the response speed is faster;
- PELICAN protective box design, protection grade IP65;
- Use the multi-principle sensor array method to quickly identify the type and concentration of the gas being measured;
- Small size, easy to carry, can be carried by hand, and can be equipped with a single shoulder strap;
Application areas
- On-site emergency detection of sudden chemical accidents
- Environmental emergency inspection by environmental protection department
- Rapid testing by epidemic control and health departments
- On-site pollution source emission testing
- Workplace safety monitoring and analysis testing
- Special poisonous gas detection
Gas list
Gas type |
examination range |
resolution |
Carbon monoxideCO |
0-500 |
1 |
Chlorine Cl2 |
0-100 |
1 |
Nitrogen dioxide NO2 |
0-100 |
1 |
Ammonia NH3 |
0-100 |
1 |
OxygenO2 |
0-30%vol |
0.5%VOL |
Hydrogen H2 |
1000, 4%vol |
2, 100 |
Fluorine gas F2 |
0-10 |
0.1 |
Ethylene C2H4 |
0-20 |
0.1 |
TetrahydrothiopheneTHT |
0-100 |
1 |
Volatile organic compounds VOC |
50、5000 |
0.05、10 |
Hydrogen sulfide H2S |
0-100 |
1 |
Sulfur dioxide SO2 |
0-100 |
1 |
Hydrogen fluoride HF |
0-10 |
0.1 |
Combustible gas LEL |
0-100%LEL |
0.5%LEL |
Hydrogen chloride HCl |
0-30 |
0.1 |
carbon dioxide CO2 |
0-1000、0-5%、20% 、100% |
10、0.01%、1%、1% |
Phosphine PH3 |
0-20 |
0.1 |
Arsenic ASH3 |
0-20 |
0.1 |
Nitric OxideNO |
0-300 |
1 |
FormaldehydeHCHO |
0-30 |
0.1 |
All units not marked above are ppm.
Technical indicators
Detection principle |
Electrochemistry, photoionization, infrared, catalytic combustion |
sensor |
smart sensor |
Range, resolution |
See gas table for details |
Sampling method |
pump suction |
Working power supply |
110VAC~240VAC, built-in lithium battery can work continuously for 8 hours (can be expanded) |
Power consumption |
15W |
output signal |
USB, RS232, RS485, GPRS, network port, DIDO, etc. |
Response time |
T90<15s(NH3<60s) |
Display method |
800X480 LCD 7-inch touch screen |
ambient temperature |
-20℃~+50℃ |
environment humidity |
0-95%RH (no condensation) |
Environmental pressure |
65.1kPa~115kPa |
Dimensions |
420X200X350mm(lengthXwidthXheight) |
weight |
7kg |